My build has no audio and my flashy light, it's just solid. Before I start inundating you with voltages and pictures, Where is a good place to start.
Quote from: jimilee on August 01, 2014, 06:00:55 PM
Where is a good place to start.
Voltages and pictures and audio probe results
would be a good place to
start.
Ok then. Where does the audio go after q1? I can't find it.
If you're rockin before boxin, be sure to hook up the switch that toggles between the effects. I wasted a week troubleshooting before it occurred to me to hook it up. Bingo!
Quote from: midwayfair on August 01, 2014, 06:19:59 PM
Quote from: jimilee on August 01, 2014, 06:00:55 PM
Where is a good place to start.
Voltages and pictures and audio probe results would be a good place to start.
IC 1
1-0 8-0
2-.2 7-9.1
3-.6 6-.4
4-1 5-.5
IC-2
1-0 8-0
2-.2 7-9.1
3-0 6-.7
4-1 5-.6
IC3
1-.7 8-0
2-0 7-9.4
3-0 6-5.9
4-.7 5-.6
IC4
1-.6 8-0
2-8 7-9.4
3-0 6-8.3
4-.7 5-.6
IC5
1-8.8 8-8.8
2-7.6 7-9.4
3-7.2 6-7.2
4-.7 5-.8
IC-6
1-9.4 8-9.4
2-7 7-.2
3-0 6-.8
4-.9 5-.7
Q1-2n5088
C-9.1 B-0 E-1
Q2-J201
G-.3 S-7.9 D-9.1
Q3-2n3906
E-.5 B-0 C-.5
Q4-2n5088
C-.7 B-.3 E-8.5
Q5-J201
G-0 S-.7 D-9.4
Q6-J201
G.5 S-0 D-0
(https://dl.dropboxusercontent.com/u/5560115/shark.jpg)(https://dl.dropboxusercontent.com/u/5560115/shark2.jpg)(https://dl.dropboxusercontent.com/u/5560115/shark3.jpg)
Fixed!!! I knew it was a bone head move, I had swapped IC5 and IC6. Works like a champ now.
I hate it when I do that stuff...
Glad you got it working!
[quote author=blearyeyes link=topic=16793.msg159511#msg159511 date=1407002904]
I hate it when I do that stuff...
Glad you got it working!
[/quotes I checked those bastards 6 times too. It wasn't until I looked at a build report that I noticed it.