Text only | Text with Images

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: Zerstorte Zelle on August 08, 2014, 07:26:56 PM

Title: New Ver. Slow Loris Clip Switch
Post by: Zerstorte Zelle on August 08, 2014, 07:26:56 PM
I was wondering if I used an On / Off / On switch for clipping on the new version slow loris if I will still retain the functionality of the previous versions. "Center off"

-ZZ
Title: Re: New Ver. Slow Loris Clip Switch
Post by: Zerstorte Zelle on August 10, 2014, 02:48:51 PM
bump
Title: Re: New Ver. Slow Loris Clip Switch
Post by: RobA on August 10, 2014, 03:36:24 PM
Looking at the new schematic, an on/off/on should still take all clipping diodes out of the circuit when it is in the center position. Looking at the layout makes me think that this is still the case too.
Title: Re: New Ver. Slow Loris Clip Switch
Post by: murdog47 on August 10, 2014, 07:47:14 PM
Yep...same thing just not board mounted anymore
Title: Re: New Ver. Slow Loris Clip Switch
Post by: cajone5 on August 16, 2016, 04:12:05 PM
Planning to wire up the switch on my slow loris tonight.  Wondering if I should use a on/off/on instead of on/on.  Can anyone verify that the on/off/on would offer a third no-diode option with the current board?
Title: Re: New Ver. Slow Loris Clip Switch
Post by: jimilee on August 16, 2016, 04:40:57 PM
Wouldn't it have to be on / on / on?


Sent from my iPhone using Tapatalk
Title: Re: New Ver. Slow Loris Clip Switch
Post by: cajone5 on August 18, 2016, 07:31:54 PM
Ended up just using SPDT on/on.  Sounds sweet as is.
Text only | Text with Images