Hey Guys,
im intrigued with a new problem.
when i play a CD player through my band's mixer in order to hear the song through the PAs everything is ok. But when i use an ipad or iphone player, it sounds like some filtering is happening. Sometimes i can hear just the backing vocals of a song for example.
im using the same cable, just switching the ipod or iphone X CD player..
any clue of what is happening?
thanks a lot in adnvace
Same tracks?
Try another cable anyway. What kind of CD player is it? Would expect RCA connectors.
So you are using a 3.5mm stereo to RCA? Or xlr? Your pa is setup for stereo? Or mono?
Sounds like a phasing issue to me. One of your connections is inverted phase and canceling out the other channel.
^^ what he said.
Hey guys.
first of all thanks for helping.
so, it happen with the same track.
yes, it is a 3,5mm with an adapter to RCA.
rullywowr: the phase inversion, you mean on the RCA cable? like ground on output and vice versa? :P
Headphone output on the iPad/Phone maybe overdriving the board inputs? Does sound like a phasing problem though.
Cord may not be fitting properly in to the iPad also, the newer one are shaped a bit oddly to where it won't go down all the way.
Quote from: jimilee on August 15, 2014, 12:10:37 AM
Cord may not be fitting properly in to the iPad also, the newer one are shaped a bit oddly to where it won't go down all the way.
Hi jimmi,
this weekend i will work on the variables, like cables, adaptors etc..
you might be right, because this problem is happening most of the time, but not All the time.
Cheers
I think jimi is right. You'll need to use a cable with a slim line 3.5mm jack. Like this: http://images.esellerpro.com/2485/I/573/6/2TTS-01WHTa.jpg.
Regular ones don't tend to go in properly on some tablets and mobile phones.
Sent from my GT-I9100 using Tapatalk 2
Alignment and getting the jack all the way in is critical on the iPhone and other phones and tablets. They usually use a TRRS jack with the sleeve section of the standard TRS jack divided with another ring section to carry the mic signal. Since those things are so small, if you don't have it all the way in, you can have part of your right channel sitting on the ground and/or the ground not making complete contact.
There's also some active sensing that Apple does on the mic line for running controls from the headset things. I did some playing with early versions of the iPad as an effects device and sometimes clicks or hard picking would flip the state the audio system was in and cause it to do weird things. I'd guess that probably isn't your problem, but if you aren't all the way in on the jack, then static or bouncing on the plug might do some strange stuff.
Not familiar with the ipad or iphone but for my ipod i have a dock and another adapter that give you a lineout signal as opposed to using the headphone jack for playback to a stereo or better headphone amp. Both were only a few dollars from various Asian sources. (Line Out Dock Cable)
Good article here.
http://beavishifi.com/articles/headphonejack/
Quote from: davent on August 15, 2014, 04:13:15 PM
Not familiar with the ipad or iphone but for my ipod i have a dock and another adapter that give you a lineout signal as opposed to using the headphone jack for playback to a stereo or better headphone amp. Both were only a few dollars from various Asian sources. (Line Out Dock Cable)
Good article here.
http://beavishifi.com/articles/headphonejack/
The situation with the iPads and iPhones is similar to what you describe with your iPod. It's even more of an issue with the new connectors because there isn't a straight up line out anymore. If you want HiFi sound out of them now, you need to go digital into an external DAC and then to your stereo.
Great idea guys! The only thing is how to get relatively cheap Apple plugs? :(
Thanks
Quote from: Gledison on August 15, 2014, 06:17:54 PM
Great idea guys! The only thing is how to get relatively cheap Apple plugs? :(
Thanks
Which devices do you have and what connectors are on them?
Does the audio have to be HiFi or do you just want it good enough to practice with?
Quote from: RobA on August 15, 2014, 06:32:11 PM
Quote from: Gledison on August 15, 2014, 06:17:54 PM
Great idea guys! The only thing is how to get relatively cheap Apple plugs? :(
Thanks
Which devices do you have and what connectors are on them?
Does the audio have to be HiFi or do you just want it good enough to practice with?
No need for hifi , just good enough!:)
The connection is a connector from the 3,5mm to RCA!
Quote from: Gledison on August 15, 2014, 06:43:35 PM
Quote from: RobA on August 15, 2014, 06:32:11 PM
Quote from: Gledison on August 15, 2014, 06:17:54 PM
Great idea guys! The only thing is how to get relatively cheap Apple plugs? :(
Thanks
Which devices do you have and what connectors are on them?
Does the audio have to be HiFi or do you just want it good enough to practice with?
No need for hifi , just good enough!:)
The connection is a connector from the 3,5mm to RCA!
I meant which connectors do you have available on the iDevice. Does it have the 30-pin or the new Lightning? If it has the 30 pin, then you could DIY a connector like in the link given above for not very much money. Just find an old 30 pin cable that has all the connections made for the audio in it and then break out the stereo out jacks to some RCA connectors. I've done that and the results are fine. If you have a Lightening connector, then that's not possible.
For the not audiophile approach, Belkin makes a cable that's meant for 3.5mm jacks on phones out to RCA connectors. Apple sells them on their website and they should work OK. I imagine that you can find cheap knockoffs that'll work just as well on ebay. I have a set of Monstercable 3.5mm to RCA things that I think came with the old Airport express (I certainly didn't buy them on purpose ;) ). For a quick, cheap connection form an iPad to my stereo, they work fine. The headphone out jack on the iPad is meant to drive headphones, but the inputs on my stereo can certainly handle it fine without having to make anything to match the impedance or get a higher drive. I don't turn the iPad volume up all the way. I actually turn it down below half and it works fine. It is far from perfect, but it is workable and should do fine for what you need.