Print Page - Mosfet boost - first try at a 1590A

Title: Mosfet boost - first try at a 1590A
Post by: miter53 on August 17, 2014, 06:25:20 AM

AMZ mosfet boost using a Stomptown Oshpark board and Jon's (midwayfair) Millenium II bypass board.

(http://imagizer.imageshack.us/v2/1600x1200q90/673/4JMfv4.jpg)

(http://imagizer.imageshack.us/v2/1600x1200q90/913/BZ0bdl.jpg)

Man, these things are friggin' small!

Title: Re: Mosfet boost - first try at a 1590A
Post by: alanp on August 17, 2014, 06:30:45 AM

Addictive, though! You begin to start doing these builds for the challenge.

Very clean job, here.

Title: Re: Mosfet boost - first try at a 1590A
Post by: wgc on August 17, 2014, 02:05:43 PM

Nice- and after a while you almost don't even want to touch a 125b. ;) Almost.

Title: Re: Mosfet boost - first try at a 1590A
Post by: miter53 on August 17, 2014, 05:44:16 PM

I don't know about that...I just want to build another roomy amp now!

Title: Re: Mosfet boost - first try at a 1590A
Post by: Stomptown on August 17, 2014, 06:43:21 PM

Looks great! Nice to see someone put the Mosfet boost to use. I am curious whether or not the Millennium bypass reduced the audible "pop" when the pedal is engaged.

Title: Re: Mosfet boost - first try at a 1590A
Post by: miter53 on August 17, 2014, 06:50:03 PM

It does seem very quiet. It's the first time I've tried a DPDT switching circuit, and I like it a lot. Big thanks to both Jons for the layouts.

madbeanpedals::forum

Projects => Build Reports => Topic started by: miter53 on August 17, 2014, 06:25:20 AM