EA Trem built on Dave's Delirium Tremolo layout.
Meant to be 1590A... but it will be for next round. :)
Was my first time building or playing one of these.. very nice and simple, the available boost is very pleasant, got body and sounds fat... digging it.
'Cause all trem should be purple!
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10475681_705296042879022_7635398342240540392_n.jpg)
(https://scontent-a-ord.xx.fbcdn.net/hphotos-xaf1/t1.0-9/10620634_705296052879021_7459434349930045137_n.jpg)
sweet build. Purple is a good trem color. Hurray for the EA!
Major plus points for drilling out your pot alignment pins and not just snapping them off. Excellent work!
Love purple! Dig the offset mounted pcb too, great layout
Quote from: wgc on August 22, 2014, 03:45:17 AM
Love purple! Dig the offset mounted pcb too, great layout
Yeah! The asymmetrical guts are pretty rad.
Looks comfortably used with the distress on the finish. I really dig the counter-sink on the LED. If my drill press didn't have so much run-out I'd try it too, but I'd probably end up with a glory hole smack in the middle of the pedal face. ::)
Daymn that looks NICE.
Nailed it! Purple is grooovy man.
Awesome build. That finish is awesome!
Sent from my iPhone using Tapatalk
Thanks for the kind comments guy :)
My computer is currently shitting bricks... Did'nt meant to be snobish ;)
Quote from: lars on August 22, 2014, 01:54:53 AM
Major plus points for drilling out your pot alignment pins and not just snapping them off. Excellent work!
Thanks, could'nt do it in another way, makes à while i'm doing it like that now, makes the whole assembly easier. Everything holds in place before à single nut is tighten.
Quote from: Maple Larynx on August 22, 2014, 06:35:23 AM
Looks comfortably used with the distress on the finish. I really dig the counter-sink on the LED. If my drill press didn't have so much run-out I'd try it too, but I'd probably end up with a glory hole smack in the middle of the pedal face. ::)
Thanks, all my "one off" are done with à hand drill, i would'nt be scared of à wobbly press drill ;)