Text only | Text with Images

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: anekdote on September 10, 2014, 10:26:33 PM

Title: Moodring white noise
Post by: anekdote on September 10, 2014, 10:26:33 PM
Hello,
I built a moodring reverb pedal. It sounds great but has quite amount of white noise.
There is no white noise when mix knob all the way down, which suggest the noise came from reverb or delay stage.
Noise from belton brick? or from PT delay?
Let me know if you have any experience or suggestions.

Thanks!
Title: Re: Moodring white noise
Post by: lincolnic on September 11, 2014, 04:18:45 AM
I'd start by trying a different PT2399. This is a pretty common issue with them.
Title: Re: Moodring white noise
Post by: selfdestroyer on September 11, 2014, 02:50:32 PM
Quote from: lincolnic on September 11, 2014, 04:18:45 AM
I'd start by trying a different PT2399. This is a pretty common issue with them.

I agree with this also, I built a Cave Dweller just to test PTs since they can be so flaky at times.

Cody
Text only | Text with Images