Text only
|
Text with Images
madbeanpedals::forum
Projects => General Questions => Topic started by: jball85 on October 07, 2014, 08:37:04 PM
Title:
Sunking II 1n5817's
Post by:
jball85
on
October 07, 2014, 08:37:04 PM
Is it imperative that I use the 1N5817's or will 1N4001's work in place of them.
Title:
Re: Sunking II 1n5817's
Post by:
jubal81
on
October 07, 2014, 09:26:05 PM
It will work with 1n4001s, but it will cost you a bit of headroom voltage.
Title:
Re: Sunking II 1n5817's
Post by:
madbean
on
October 07, 2014, 09:44:11 PM
The Klon used 1N4001, so you are good there. I picked 1N5817 for the lower voltage drop.
Text only
|
Text with Images