Text only | Text with Images

madbeanpedals::forum

Projects => General Questions => Topic started by: Droogie on October 13, 2014, 03:40:25 PM

Title: Twin Peaks Trimmers
Post by: Droogie on October 13, 2014, 03:40:25 PM
Does anyone know what type of trimmers to order for this? All of mine are too small, and my Mouser fu doesn't seem to be adequate (but I'll keep trying in the mean time).

Thanks!
Title: Re: Twin Peaks Trimmers
Post by: brejna on October 13, 2014, 05:03:27 PM
If you can find 9mm trimmers, they will fit perfectly..
Title: Re: Twin Peaks Trimmers
Post by: drolo on October 13, 2014, 07:13:50 PM
It was laid out for these:
http://www.banzaimusic.com/PT10-horizontal-5k.html

But when I find myself out of these and usually I am able to fit all kinds of trimmers in thee by bending their legs to the correct position

Have done it with these:
http://www.banzaimusic.com/Trimpot-TP-2k-Horizontal.html

or even these:
http://www.taydaelectronics.com/potentiometer-variable-resistors/cermet-potentiometers/5k-ohm-trimmer-potentiometer-cermet-1-turn-3362p.html
Title: Re: Twin Peaks Trimmers
Post by: Droogie on October 13, 2014, 07:50:29 PM
Quote from: drolo on October 13, 2014, 07:13:50 PM
It was laid out for these:
http://www.banzaimusic.com/PT10-horizontal-5k.html

Sweet! I took a gander at Mouser and ordered that type this morning. Or at least I think I did—I'm never absolutely sure until the stuff shows up.  :)

Thanks!
Text only | Text with Images