Text only | Text with Images

madbeanpedals::forum

Projects => Build Reports => Topic started by: Jakes Dad on November 22, 2014, 09:13:54 PM

Title: Spackler
Post by: Jakes Dad on November 22, 2014, 09:13:54 PM
I etched a board!  And it works!!! This is the MadBean Spackler that I etched.  Not really sure why I suddenly felt a need to try etching. 

Box is a Silver Vein 1290NS from Pedal Parts Plus, 3PDT board from GuitarPCB, most of the guts from Tayda, I think the knobs are from Small Bear, and the stomp is from BLMS.

(http://memberfiles.freewebs.com/49/13/104961349/photos/undefined/PB221936.JPG)

(http://memberfiles.freewebs.com/49/13/104961349/photos/undefined/PB221937.JPG)

Provides a nice boost and can add a significant amount of nice warm mids to single coils.

Chuck
Title: Re: Spackler
Post by: selfdestroyer on November 22, 2014, 09:30:52 PM
Very nice build you go there. Congratulation on your first board etch.. be prepared, its addicting.

Cody
Title: Re: Spackler
Post by: cooder on November 22, 2014, 09:36:26 PM
Great job, good on ya for etching your first board and big knobs make big sounds! ;)
Title: Re: Spackler
Post by: Stomptown on November 23, 2014, 03:02:37 AM
Well done Chuck! I love them over-sized knobs!  8)
Title: Re: Spackler
Post by: atreidesheir on November 30, 2014, 01:31:01 AM
Makes you want to adjust them constantly.
Title: Re: Spackler
Post by: flanagan0718 on November 30, 2014, 03:40:11 AM
Those knobs make it look like its in a 1590A. Great job!
Text only | Text with Images