Print Page - help wiring the gain pot on a Kingslayer (v1)

Title: help wiring the gain pot on a Kingslayer (v1)
Post by: MarkL on December 25, 2014, 03:20:44 AM

I have a Kingslayer (v1) PCB, and I'm not sure which set of lugs on the volume pot should go to "dirt" and which should go to "clean". I'd appreciate any help...thanks in advance.

Title: Re: help wiring the gain pot on a Kingslayer (v1)
Post by: alanp on December 25, 2014, 03:51:49 AM

IIRC, they go to the dualgang gain pot, not volume.

Doesn't matter which set of lugs they go on, as long as dirt and clean go to separate layer lugs and are not mixed. IANAJ (I Am Not A Juansolo) though.

Title: Re: help wiring the gain pot on a Kingslayer (v1)
Post by: playpunk on December 25, 2014, 12:51:16 PM

Look at the wiring diagram.
I used a different color for each lug, afaik

Sent from my iPhone using Tapatalk

madbeanpedals::forum

General => Open Discussion => Topic started by: MarkL on December 25, 2014, 03:20:44 AM