hello
I have just received sunkin ii and would like a help to set up stock klon.
R3 - 4k99
R12 - 27k
C2 - 150n
C3 - 330N
C4 - 180N
C5 - 47n
C7 - 68n
C12 - 6n8
C13 - 18n
this would be in stock klon sunking II?
thanks
No, those values are incorrect. The values you listed came from the original schematic release of the Klon which had errors. That schematic was later revised in April 2009. The Sunking uses the corrected values.
Quote from: madbean on January 04, 2015, 10:16:51 AM
No, those values are incorrect. The values you listed came from the original schematic release of the Klon which had errors. That schematic was later revised in April 2009. The Sunking uses the corrected values.
would this correct?
Hi,
I used the sunking 2 schematic and did a 1590a layout.
It works, but has some noise, I guess I should use shielded cable for the gain potentiometer, but I used a 16mm one, there was almost no space in the box...
(http://i.imgur.com/073QGMwl.jpg)
(https://68.media.tumblr.com/fdbd938acf7b96f196a8e801a5e390a5/tumblr_nm974wRrIt1qh9jzro2_540.jpg)
Thanks for the schematic guys!
Cheers,
Thomas
Wow man that is impressive! What an etch, and cool layout too.. very nice work! 8)
Nice job!
Sent from my iPhone using Tapatalk
Jam-packed full of goodness.
The etch is awesome!
That etch, man! Nice!
Quote from: andregarcia57 on January 04, 2015, 10:32:34 AM
Quote from: madbean on January 04, 2015, 10:16:51 AM
No, those values are incorrect. The values you listed came from the original schematic release of the Klon which had errors. That schematic was later revised in April 2009. The Sunking uses the corrected values.
would this correct?
I would just use the Sunking II build doc to be safe:
http://www.madbeanpedals.com/projects/Sunking2/Sunking2.pdf
Wow, so I dig that etch. That is great
Sent from my iPhone using Tapatalk