Hi guys
I'm building my first fuzz circuit (big muff pi variant) and I wanted to ask if it's a good idea to try and find 4 trannies with hfe's that are pretty close to one another. Does it matter?
Also, I was reading somewhere about a month ago that people put them in order of lowest to highest (I think) but now I can't find where on the interwebz I found that discussion. Does anyone subscribe to that theory?
thanks everyone
Hey,
when I rebuild my BYOC Large Beaver (Big Muff Pi) to Violet Ram´s Head specs, I found this post on the BYOC forum very informative.
http://www.buildyourownclone.com/board/viewtopic.php?f=24&t=6006
He also writes about the transistor gain in each spot. Maybe this can help you out.
Is it ok to link to other content here, Brian ?
I took my schematic from here:
http://www.pisotones.com/BigMuffPi/psst/BMP_versions.htm
And this guy has some nice info as well:
http://rkerkhof.ruhosting.nl/Taas/Mods/Big%20Muff.htm
Absolutely! Link away, and thanks for doing so.
Thanks boom, that was a good read. 8)