Had popped this a while back and was about to hook up switches when I realized the following:
(http://imageshack.com/a/img912/1112/pdMjK8.jpg)
From the schem it looks like it just goes to ground, so I imagine I could connect to another ground source on the board, but just wanted to make sure. Thanks!
This is normal as It was documented in the Doubelganger 2.1D V4 build doc. It is just a ground pad and I actually just used the pad labeled GND1 for my build.
Cody
+1 same
Cool, not sure I have that version of the build do. Thanks for the info!
Yeah sorry blame the gerbers or the fab house....
It's in the build doc, I prefer to link it to the gnd I. The centre footswitch but yeah any gnd pad will suffice...