Text only | Text with Images

madbeanpedals::forum

Projects => General Questions => Topic started by: MarkL on January 28, 2015, 01:56:46 AM

Title: Applying a Little Angel mod to a PT2399 delay
Post by: MarkL on January 28, 2015, 01:56:46 AM
I was reading up on the Little Angle chorus, and one of the mods to reduce noise involves strapping a 100nF cap across the GND and OUT legs of the 7805 regulator.  Could this be profitably applied to something like the Zero Point and help block noise from entering the PT2399 to start with? 
Title: Re: Applying a Little Angel mod to a PT2399 delay
Post by: midwayfair on January 28, 2015, 02:16:32 AM
There's already a 100nF filter cap from +5V to ground in all versions of the Zero Point.
Title: Re: Applying a Little Angel mod to a PT2399 delay
Post by: MarkL on January 28, 2015, 02:17:02 PM
Ah -- I missed that.  Thanks Jon.
Title: Re: Applying a Little Angel mod to a PT2399 delay
Post by: MarkL on January 29, 2015, 12:33:36 AM
Never mind...looked at the wrong spot on the schem.  It's there.
Text only | Text with Images