Hi :)
Im currently testing a newly build Krankosaurus (love it), but I have a question:
Is it possible and if so, how, to have two LEDs - one for the boost also?
I found this diagram (http://s908.photobucket.com/albums/ac286/Jordnowe/?action=view¤t=krankLED.gif) from searching this forum, but I can only find help for installing one LED for the effect, not the boost, and I would really like to have a LED for each footswitch, if possible.
Can someone help?
Best regards
Jonny Z
ya, just copy the diagram you found for the other footswitch. it's identical layout.
http://www.madbeanpedals.com/forum/index.php?action=dlattach;topic=1218.0;attach=478;image (http://www.madbeanpedals.com/forum/index.php?action=dlattach;topic=1218.0;attach=478;image)
Here's the guts to mine in the build reports. Just run the positive to the positive of the dc jack and the negative to the same lug on the 3pdt switch that you did on the distortion section.
update: I forgot to mention that the led's i used were pre-fitted with resistors in the capsules, so that's why you don't see resistors connected.
It's that simple? Hehe, thought there was more to it :) Thanks alot :)
Best regards
Jonny Z
I did too at first but then I saw this guys crazy LED pedal!!
http://www.madbeanpedals.com/forum/index.php?topic=1512.0
What a maniac :)