Hi fellas, this one waited for months to be boxed and finally I did that. Here are few pics.. Hope you like it..
Cheers
(http://i1327.photobucket.com/albums/u661/Brejna/0bae638e04d2f763cb2432cbffbf9645c5223a310a90e12fd2237fb556f2514f_zps7402e62e.jpg) (http://s1327.photobucket.com/user/Brejna/media/0bae638e04d2f763cb2432cbffbf9645c5223a310a90e12fd2237fb556f2514f_zps7402e62e.jpg.html)
(http://i1327.photobucket.com/albums/u661/Brejna/c4e3a8cd85661fee7323233ee84ccece691d95f36adffabac1afb53edf217e9f_zps1116343b.jpg) (http://s1327.photobucket.com/user/Brejna/media/c4e3a8cd85661fee7323233ee84ccece691d95f36adffabac1afb53edf217e9f_zps1116343b.jpg.html)
looks fantastic brejna :) as always :)
did you etch that enclosure?
i have assembled the board too, just waits to be boxed up 8)
Beautiful work. That's a tight fit with the relay, well done.
Good job cramming all that in there. The artwork is killer, too.
Great cram job! Love the artwork. Did you use a waterslide or is that etched?
Thanks guys! I am really enjoying playing this one, I even like it more than collosalus. :) I needed bit more planing for it 'cause there are actually 3 boards inside and there was no room for mistake, also enclosure is etched and painted..
That's a lot of cramming, but I dig the result. The etching came out really good, I first thought it was a decal.
What bypass board did you use btw?
Quote from: micromegas on February 17, 2015, 05:17:28 PM
That's a lot of cramming, but I dig the result. The etching came out really good, I first thought it was a decal.
What bypass board did you use btw?
Thanks, I've screw up switching board from Thomas, so I've etch my own.. These are discontinued I think..
:o toight!
nice build brejna
Great 3D build! Lovely etch.
Nice execution in that tight enclosure Amigo. Looks great!
Thank you fellas. Appreciate it :)
Lovely!
Clean work man, looks awesome! :D
one question, whats that little board in the center? looks like some voltage regulator..
the relay bypass is underneath the jacks...
Thanks fellas :)
About little board, that is etched road rage from MB. I think it is 2013 version
ah i see, did you pump the voltage up to 12V or 18V ? how do you use it ?
Quote from: luks999 on February 19, 2015, 12:23:53 PM
ah i see, did you pump the voltage up to 12V or 18V ? how do you use it ?
It is pumped to 18v and regulated to 15v, so it takes out distorted signal in flanger..