Print Page - Simple Buffer Schematic

Title: Simple Buffer Schematic
Post by: Dulouz on March 02, 2015, 10:39:41 PM

I've previously built this buffer on vero, but I'd like to make an etch layout for it. I worked up what I think may be the schematic. Would anyone mind looking it over?

Thanks!

(http://i4.photobucket.com/albums/y104/dulouz/Photo%20Mar%2002%202%2027%2007%20PM.jpg)
(http://1.bp.blogspot.com/-6glRUvDGhR8/T5_MiMmedvI/AAAAAAAAAU8/-FnqOFgN-00/s1600/Buffer.gif.gif)

Title: Re: Simple Buffer Schematic
Post by: LaceSensor on March 02, 2015, 10:50:42 PM

your vero is correct to the schem if thats what you wanted to know?

typically signal flows left to right in schematics however so you might want to address that.

Title: Re: Simple Buffer Schematic
Post by: Dulouz on March 02, 2015, 10:54:57 PM

Thanks!

Yeah. That was my question. I was working backwards from the vero layout.

I'll change the signal flow when I make the Eagle schematic.

madbeanpedals::forum

General => Open Discussion => Topic started by: Dulouz on March 02, 2015, 10:39:41 PM