madbeanpedals::forum

General => Open Discussion => Topic started by: AntKnee on March 11, 2015, 06:23:09 PM

Title: Where can I find B2M pcb mount pots?
Post by: AntKnee on March 11, 2015, 06:23:09 PM
Building a Sharkfin, and can't find anyone that sells a 2M pcb mount linear pot.
Thanks!
Title: Re: Where can I find B2M pcb mount pots?
Post by: Govmnt_Lacky on March 11, 2015, 06:33:22 PM
Smallbear or Mouser and some resistor bits soldered to the pot lugs.... DONE!  ;)
Title: Re: Where can I find B2M pcb mount pots?
Post by: selfdestroyer on March 11, 2015, 06:39:36 PM
Quote from: AntKnee on March 11, 2015, 06:23:09 PM
Building a Sharkfin, and can't find anyone that sells a 2M pcb mount linear pot.
Thanks!

Like Govmnt_Lacky said.
This is what I do:
http://music.codydeschenes.com/?p=2203 (http://music.codydeschenes.com/?p=2203)

works out perfectly.

Cody
Title: Re: Where can I find B2M pcb mount pots?
Post by: AntKnee on March 11, 2015, 06:53:00 PM
Thanks, guys. I've done that before and I would totally do that if anyone had solder lug pots, but can't find those, either.
No one seems to carry 16mm 2M pots.
Title: Re: Where can I find B2M pcb mount pots?
Post by: selfdestroyer on March 11, 2015, 06:57:55 PM
Quote from: AntKnee on March 11, 2015, 06:53:00 PM
Thanks, guys. I've dont that before and I would totally do that if anyone had solder lug pots, but can't find those, either.
No one seems to carry 16mm 2M pots.

I need to update my post since I also do the same process with the non-angled PCB mount ones also. I bend the legs down on the pot and I  use a "third hand", one clip to hold the pot and the other to hold the solid copper wire. I line up the wire and the pot leg and then soldier it on.

hope this makes sense.

Cody
Title: Re: Where can I find B2M pcb mount pots?
Post by: AntKnee on March 11, 2015, 06:59:58 PM
Quote from: selfdestroyer on March 11, 2015, 06:57:55 PM
Quote from: AntKnee on March 11, 2015, 06:53:00 PM
Thanks, guys. I've dont that before and I would totally do that if anyone had solder lug pots, but can't find those, either.
No one seems to carry 16mm 2M pots.

I need to update my post since I also do the same process with the non-angled PCB mount ones also. I bend the legs down on the pot and I  use a "third hand", one clip to hold the pot and the other to hold the solid copper wire. I line up the wire and the pot leg and then soldier it on.

hope this makes sense.

Cody

It does, but I still can't find 2M pots to work with.
Title: Re: Where can I find B2M pcb mount pots?
Post by: mgwhit on March 11, 2015, 07:05:13 PM
http://smallbear-electronics.mybigcommerce.com/alpha-single-gang-16mm-solder-terms-linear-audio-taper/
Title: Re: Where can I find B2M pcb mount pots?
Post by: AntKnee on March 11, 2015, 07:07:14 PM
Quote from: mgwhit on March 11, 2015, 07:05:13 PM
http://smallbear-electronics.mybigcommerce.com/alpha-single-gang-16mm-solder-terms-linear-audio-taper/

Hell, I must have looked 10 times and didn't see it till now.
Someone slap me.
Title: Re: Where can I find B2M pcb mount pots?
Post by: felipesareas on May 11, 2017, 03:59:40 AM
Quote from: AntKnee on March 11, 2015, 07:07:14 PM
Quote from: mgwhit on March 11, 2015, 07:05:13 PM
http://smallbear-electronics.mybigcommerce.com/alpha-single-gang-16mm-solder-terms-linear-audio-taper/
Hell, I must have looked 10 times and didn't see it till now.
Someone slap me.

same happened to me. apparently smallbear has got many different potentiometer options that are actually not so different. Thanks for the link]