Print Page - Reverse Etching an enclosure

Title: Reverse Etching an enclosure
Post by: Cevin on March 13, 2015, 08:25:45 PM

So I'm trying some new options for enclosure finishing, specially etching. There are a lot of walk throughs and info about etching, but nothing on "reverse" etching. What I'm trying to do is etch the surface so that the image is raised, paint the surface, and then sand it down until the image is visible again. Does anyone know of a tutorial on this or any tips?

Title: Re: Reverse Etching an enclosure
Post by: playpunk on March 13, 2015, 08:44:23 PM

http://music.codydeschenes.com/?page_id=2035

Title: Re: Reverse Etching an enclosure
Post by: Cevin on March 14, 2015, 12:50:31 AM

Perfect... Thanx!

Title: Re: Reverse Etching an enclosure
Post by: selfdestroyer on March 14, 2015, 01:22:58 AM

Quote from: Cevin on March 14, 2015, 12:50:31 AM
Perfect... Thanx!

If you have any question just ask. More than happy to help you out.

Cody

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: Cevin on March 13, 2015, 08:25:45 PM