Print Page - JMK Test Rig - Switch positions

Title: JMK Test Rig - Switch positions
Post by: AntKnee on March 17, 2015, 12:18:30 AM

I was trying to look at the pcb and the schematic to figure it out, but just wanted someone to please verify I have the switch positions right before I commit to my enclosure labels. Thanks!

Build doc here:
http://jmkpcbs.com/wp-content/uploads/2014/02/The-Testing-Rig.pdf (http://jmkpcbs.com/wp-content/uploads/2014/02/The-Testing-Rig.pdf)

"up" means switch toward top of pcb
"down" means switch toward bottom of pcb

PHONES/AMP
up: PHONES
down: AMP

PROBE/RETURN
up: PROBE
down: RETURN

BYPASS:
up: effect on
down: effect bypassed

OSC/GUITAR:
up: OSC
down: GUITAR

Title: Re: JMK Test Rig - Switch positions
Post by: Donleo on March 17, 2015, 12:56:40 AM

Up: effect bypassed
Down : effect on

The rest is the same as mine

-donleo

Title: Re: JMK Test Rig - Switch positions
Post by: m-Kresol on March 17, 2015, 10:10:20 AM

Have a look at mine here:
http://felix.kalium.org/index.php?id=50&lid=2

I labeled all the switches.

Title: Re: JMK Test Rig - Switch positions
Post by: AntKnee on March 17, 2015, 01:12:36 PM

Thank you

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: AntKnee on March 17, 2015, 12:18:30 AM