Text only | Text with Images

madbeanpedals::forum

Projects => General Questions => Topic started by: Jargo on June 19, 2011, 12:54:00 AM

Title: Aristocrat Caps (C9 & C20)
Post by: Jargo on June 19, 2011, 12:54:00 AM
 I asked about this in another thread...
  I have a couple of Metal Film Caps left over from something else. Can I use these huge yellow monsters (105k) in the C9 & C20 locations??? I plan on breadboarding them later to find out, but figured I asked first.

Thanks all,

Jargo


It looks like one of these



[attachment deleted by admin]
Title: Re: Aristocrat Caps (C9 & C20)
Post by: bigmufffuzzwizz on June 19, 2011, 01:08:20 AM
If you can get them to fit in there, they should work just fine!  :)
Title: Re: Aristocrat Caps (C9 & C20)
Post by: Jargo on June 19, 2011, 01:19:35 AM
I thought about perhaps from behind the board, and bent as to remain flush with the PCB. We'll see...Thanks so much!!
Title: Re: Aristocrat Caps (C9 & C20)
Post by: bigmufffuzzwizz on June 19, 2011, 06:43:55 AM
You could solder them to a piece of vero/perfboard and just run wires to the pads where they should be.
Title: Re: Aristocrat Caps (C9 & C20)
Post by: Jargo on June 19, 2011, 10:18:20 PM
Like this! next time, hopefully sound samples...!

[attachment deleted by admin]
Text only | Text with Images