Print Page - Which Rat mode is the Runt circuit

Title: Which Rat mode is the Runt circuit
Post by: FloorIt on April 10, 2015, 09:44:05 PM

Many of the Rat clones have a three way switch controlling these three modes:
1. Stock diodes
2. Diode lift (no diodes)
3. LED clippers

Does the Runt use mode 1?

Title: Re: Which Rat mode is the Runt circuit
Post by: madbean on April 11, 2015, 01:29:23 AM

Yup, mode 1.

Title: Re: Which Rat mode is the Runt circuit
Post by: FloorIt on April 11, 2015, 02:12:25 AM

Thanks ;D

Title: Re: Which Rat mode is the Runt circuit
Post by: juansolo on April 11, 2015, 03:15:43 PM

Nothing to stop you putting an on/off/on in with Si on one side and LEDs on the other in place of the onboard diodes.

Title: Re: Which Rat mode is the Runt circuit
Post by: luks999 on April 15, 2015, 04:07:15 PM

Quote from: juansolo on April 11, 2015, 03:15:43 PM
Nothing to stop you putting an on/off/on in with Si on one side and LEDs on the other in place of the onboard diodes.

this. or a rotary. whatever fits best for your build

madbeanpedals::forum

Projects => General Questions => Topic started by: FloorIt on April 10, 2015, 09:44:05 PM