Print Page - Kingslayer- where does the Tanatalum 1uF cap go?

Title: Kingslayer- where does the Tanatalum 1uF cap go?
Post by: FloorIt on April 17, 2015, 02:01:43 AM

This circuit uses (5) 1uF caps: C3, C10, C11, C12, C17. According to the shopping list one of them should be a Tanatalum cap. Which one? Is there a way to tell by looking at the board?

Title: Re: Kingslayer- where does the Tanatalum 1uF cap go?
Post by: madbean on April 17, 2015, 11:26:02 AM

Floor, it goes in C10. You can tell because it is drawn on the board as an electrolytic, whereas the other 1uF caps are drawn as film.

Title: Re: Kingslayer- where does the Tanatalum 1uF cap go?
Post by: FloorIt on April 17, 2015, 08:53:51 PM

Thanks!

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: FloorIt on April 17, 2015, 02:01:43 AM