Another 1590A build - these things are addictive. Finished up this afternoon. Brian's Egghead board pretty much by the BOM - used an NE5532P IC and C2 is a 100pf and a 22pf because I forgot to order a 120pf. Printer ceased to pee so I couldn't use the graphic on it but after I drilled the enclosure I grabbed a piece of steel wool and some All Metal stainless steel polish. After scrubbing it a bit I wiped it off to find a reasonably shiny surface (the doesn't show in the photos) that looks very different from a sanded surface. Board from MadBean, wire from Guitar PCB, Hammond box from an eBay seller, and all other hardware and knobs from Small Bear.
(http://memberfiles.freewebs.com/49/13/104961349/photos/undefined/IMG_0505.jpg)
Guts:
(http://memberfiles.freewebs.com/49/13/104961349/photos/undefined/IMG_0506.jpg)
Chuck
Nice. That's really clean. I'm hesitant to try a 1590A build, I think it would drive me nuts.
I like the countersunk LED bevel, very cool.