Text only | Text with Images

madbeanpedals::forum

Projects => Build Reports => Topic started by: vinnie on July 03, 2011, 11:53:42 PM

Title: Suntaur or Cenking?
Post by: vinnie on July 03, 2011, 11:53:42 PM
Ended up with C15 to 6,8n, 10KA as Volume pot, IC3 as MAX1044 and a 9,1 zener for D3; the switch is for diode selection between 1n270 and BAT41.

As somebody said, bye bye tube screamer.


(http://img.photobucket.com/albums/v640/sdanand77/Stompboxes/Centaur/DSCF1420.jpg)

(http://img.photobucket.com/albums/v640/sdanand77/Stompboxes/Centaur/DSCF1417.jpg)

The iron is hot and I´m moving to my next Madbean's project

(http://img.photobucket.com/albums/v640/sdanand77/Stompboxes/Jimi%20Face/jimiface-1.jpg)

ENJOY!
Title: Re: Suntaur or Cenking?
Post by: nzCdog on July 04, 2011, 12:58:02 AM
Cool build, nice and tidy! 

I keep wondering about these Klon clones... never played one but their hype is so huuuuge that I'm almost certain I would be dissapointed.  I reckon my next overdrive will be a sub-mini tube pedal  8)
Title: Re: Suntaur or Cenking?
Post by: thetrend77 on July 04, 2011, 01:49:49 AM
Those knobs again! Where do you get those, I want them!
Title: Re: Suntaur or Cenking?
Post by: vinnie on July 04, 2011, 02:08:59 PM
Quote from: nzCdog on July 04, 2011, 12:58:02 AM
Cool build, nice and tidy! 

I keep wondering about these Klon clones... never played one but their hype is so huuuuge that I'm almost certain I would be dissapointed.  I reckon my next overdrive will be a sub-mini tube pedal  8)

Thanks a lot nzCdog!!

I thought the same before building one, but you have to try it man, from my point of view it works better as booster than as override, of course is not worth the $600 that is usually asked for an original (no pedal worth this amount of money), but is a very refined overdrive-boost, good luck with your next small built!!


Quote from: thetrend77 on July 04, 2011, 01:49:49 AM
Those knobs again! Where do you get those, I want them!

I bought them here (http://www.musikding.de/product_info.php/info/p785_Hat-Knob.html) them are very short, you have to cut about the half of the pot shaft if you don't want them an inch over the enclosure.

Cheers! :D
Title: Re: Suntaur or Cenking?
Post by: bigmufffuzzwizz on July 04, 2011, 05:17:59 PM
Nice job! It really fits perfect in that enclosure. I agree those knobs really match the pedal as well.
Title: Re: Suntaur or Cenking?
Post by: gtr2 on July 08, 2011, 11:06:13 AM
This is real classy!

Josh
Title: Re: Suntaur or Cenking?
Post by: tubeman on July 11, 2011, 01:05:15 PM
Yes and Thank you madbean for letting me say this....

BYE BYE TUBE SCREAMER!!!
Title: Re: Suntaur or Cenking?
Post by: nzCdog on July 11, 2011, 07:01:50 PM
Quote from: tubeman on July 11, 2011, 01:05:15 PM
Yes and Thank you madbean for letting me say this....

BYE BYE TUBE SCREAMER!!!
TAKE THAT BACK! (lol jk) ;)
Title: Re: Suntaur or Cenking?
Post by: vinnie on July 12, 2011, 06:34:01 AM
Quote from: nzCdog on July 11, 2011, 07:01:50 PM
Quote from: tubeman on July 11, 2011, 01:05:15 PM
Yes and Thank you madbean for letting me say this....

BYE BYE TUBE SCREAMER!!!
TAKE THAT BACK! (lol jk) ;)
YEAH! TAKE IT BACK!
Text only | Text with Images