Gudday all, this is about my 9th attempt at posting this build. I blame my dodgey internet.
Anyway, it's a Afterlife. I hate testing compressors because I never know if they're working. In this case turning the Sustain knob clockwise reduces the volume, and turning the Volume knob clockwise brings it back up again.
This distorts a bit with my Tonezone pickup at the bridge, but not with the 59 at the neck. Can I put a resistor across the circuit input to ground to reduce the level going in? If so, what value?
This is the usual black etching primer, with a coat of white undercoat on the top as backing for the generic inkjet sticker label that gets a bit transparent when the clear goes on. Again, in this case it's an automotive lacquer that dries to the touch very quickly, and doesn't seem to yellow at all.
(https://fbcdn-photos-c-a.akamaihd.net/hphotos-ak-xlf1/v/t1.0-0/p206x206/12744015_1112403238822345_7163525695333674838_n.jpg?oh=abb828f4232be078a87c10f599ef676a&oe=57603DC6&__gda__=1465458186_98cc3ecc5c1840b4b4f82bc52ed6efb3)
(https://scontent-lax3-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/12742437_1112403255489010_8811726227967635962_n.jpg?oh=bd508ba8bf63825cd9dd165508cde7b4&oe=5722F184)
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10255610_1112403648822304_855625945297410332_n.jpg?oh=30f50616d43c17af0f0395b33dd855f5&oe=572E02FB&__gda__=1466393458_3da1a2b247d32dfe59f14da9323f08e8)