madbeanpedals::forum

Projects => Build Reports => Topic started by: juansolo on May 01, 2016, 01:58:13 PM

Title: Vault Boy 2
Post by: juansolo on May 01, 2016, 01:58:13 PM
Another vault boy (for the same guy). This one's a little smaller with only two effects; a Jumbo Tonebender and a Uglyface+LFO (Machette).

(https://scontent-ams3-1.xx.fbcdn.net/t31.0-8/13123132_870497639723624_8790525912823655290_o.jpg)

(https://scontent-ams3-1.xx.fbcdn.net/hphotos-xfl1/t31.0-8/13119967_870497673056954_8821455563333068677_o.jpg)
Title: Re: Vault Boy 2
Post by: Orbis_Ignis on May 02, 2016, 12:16:11 AM
Love the vault boy! I really need to play Fallout 4, but between kids and pedal building, I dont have any time :'(
Title: Re: Vault Boy 2
Post by: Martan on May 02, 2016, 07:48:53 PM
Very nice! Any special provisions needed to use the Machete in a multi? I am planning to use it into a ring mod and bit crusher...
Title: Re: Vault Boy 2
Post by: juansolo on May 02, 2016, 09:45:27 PM
Nope, it's a noisy beast regardless if you leave the threshold up or the LFO on. If you don't it just behaves like any other pedal when off.

As usual with LFO's, keep signal lines away from that bit. If you do have to cross it, shield it.
Title: Re: Vault Boy 2
Post by: wgc on May 08, 2016, 12:14:28 PM
Killer
Title: Re: Vault Boy 2
Post by: Leevibe on May 10, 2016, 02:26:42 PM
Rad. This is reminding me that I need to start working through my ribbon cable. I always forget I have it. Perfection as usual, Juan.