Today i modified my BB2 to true bypass and i was thinking if i could easily do the soft/hard cliping mod that is mentioned in the 8BALL document.
Pic of the pcb
(http://mirosol.kapsi.fi/wp-content/uploads/2014/01/BB2-BluesBreaker-guts2.jpg)
thanks in advance!
With a DPDT (on-on) switch you can switch the diodes out of the feedback loop of the op-amp and put a pair of red LED's to ground as clippers.
I am not savvy enough to draw you up a diagram on this, but that's the idea.
I dont have enough experience to understand completely what i have to do. I am searching the interwebs as i wait for answers in this thread. If someone had the time to make a sketch this could save me some time. :) :) :) :) thanks for the reply