Text only | Text with Images

madbeanpedals::forum

Projects => How Do I? Beginner's Paradise. => Topic started by: K3yPr0gg3r on May 11, 2016, 08:59:19 PM

Title: Re: Non-Polar Caps
Post by: K3yPr0gg3r on May 11, 2016, 08:59:19 PM
Hi,

I've got a build that requires a 10u Non-Polarized Cap. I found this: http://www.newark.com/multicomp/mcgpr63v106m5x11/aluminum-electrolytic-capacitor/dp/38K4707
The only thing is it's HUGE! 11mm height, and I'm not sure it will fit on the board...another from the TH Custom Effects Jenny build. Ran a search on Mouser, SB, and Tayda with 0 success.

Thanks for any help
Title: Re: Non-Polar Caps
Post by: Jules on May 11, 2016, 09:31:43 PM
Small Bear have non polar electro in 10uf, I bought some just the other day.
Title: Re: Non-Polar Caps
Post by: BrianS on May 11, 2016, 11:25:32 PM
http://www.mouser.com/ProductDetail/Nichicon/UES1V100MEM/?qs=sGAEpiMZZMtZ1n0r9vR22RkXiisTdIAVnlIrinIWb3U%3d

Mouser .42 cents
Title: Re: Non-Polar Caps
Post by: K3yPr0gg3r on May 11, 2016, 11:40:11 PM
11 mm height isn't too big? I am enclosing in a 125B, so I guess I'll have enough room. Thank you for your help!!
Title: Re: Non-Polar Caps
Post by: EBRAddict on May 12, 2016, 01:24:24 AM
If constrained on headroom, and depending on the PCB layout, sometimes you can lay/bend the tall caps horizontally over resistors or diodes.
Text only | Text with Images