Hi guys, first of all sorry for me English.
I'm having some trouble with switch pop. I have put 5 pedals in one box. Led's don't cause "pop" in this case.
I use this wiring. In grounded (not show on picture) First 3pdt jack out goes to In jack from the next 3pdt.
(http://i59.tinypic.com/oqhve8.jpg)
What do you think? Can you help me?
Which circuit pops? What circuits are in the box?
Sent from my iPhone using Tapatalk
Quote from: jimilee on June 01, 2016, 12:36:41 AM
Which circuit pops? What circuits are in the box?
Sent from my iPhone using Tapatalk
All circuit pop.
Guitar -->CrunchBox-->TS808-->Klon-->SanSamp-->Rub a Dub Reverb-->Amp
Tube amp?
Sent from my iPhone using Tapatalk
Quote from: jimilee on June 01, 2016, 12:44:06 AM
Tube amp?
Sent from my iPhone using Tapatalk
Yes, Vox AC15 or Fender Champ DIY
Power Station with 7809cv
I add a buffer before pedals chain
Put a 1M resistor across the input jack lugs from tip to sleeve. With that many pedals, it's hard to pinpoint the issue.
Sent from my iPhone using Tapatalk
Quote from: J. Ignacio on June 01, 2016, 12:04:14 AM
In grounded (not show on picture)
Do you mean you got the circuit input grounded when its bypassed? So you got jumper from the "To Circuit Input" to the empty pad?
So on the input jack itself, you have a tip and a sleeve lug. Put a resister from the tip lug to the sleeve lug. That should tame it.
Sent from my iPhone using Tapatalk
Yes Jebus.
Input fx grounded.
(http://i1281.photobucket.com/albums/a512/JIgnacio_90/Conexion%203PDT%20In%20M_zpsssbz6veg.jpg)