Anyone have working voltages on a Woodstork? They are not on the BOM. I am fairly certain it's the 1044 but I don't have any extras at this moment. I thought I would check voltages while I was waiting on some new ones to arrive. On the same note what is the preferred 1044? I usually get the tc (microchip)bc tayda carries them but if this one is faulty I may try a Max1044 from small bear. Thanks in advance
My assumption was correct. I took out the suspected 1044 and replaced it with a 7660s (what I had on hand and after checking data sheets it is the max 1044). Re-biased and all is right in the fuzz world.