Text only | Text with Images

madbeanpedals::forum

Projects => Tech Help - Etcher's Paradise => Topic started by: blearyeyes on July 13, 2016, 04:21:21 PM

Title: Securing board mount pots to etched boards?
Post by: blearyeyes on July 13, 2016, 04:21:21 PM
Anyone have any suggestions on securing board mount pots to etched boards?

Seems they want to pull the traces that they are soldered to off.
I would if I were them.
Title: Re: Securing board mount pots to etched boards?
Post by: madbean on July 13, 2016, 05:08:07 PM
3M double side foam tape all day long.
Title: Re: Securing board mount pots to etched boards?
Post by: alparent on July 13, 2016, 05:35:52 PM
Was going to say the same thing.
http://www.homedepot.com/p/3M-Scotch-1-in-x-1-66-yds-Extreme-Mounting-Tape-414DC-SF/203405976 (http://www.homedepot.com/p/3M-Scotch-1-in-x-1-66-yds-Extreme-Mounting-Tape-414DC-SF/203405976)
Title: Re: Securing board mount pots to etched boards?
Post by: blearyeyes on July 14, 2016, 02:25:29 AM
Thank you! Seems so obvious now that you said it....
Text only | Text with Images