Text only | Text with Images

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: andomando on August 09, 2016, 03:56:59 PM

Title: reading schematics,
Post by: andomando on August 09, 2016, 03:56:59 PM
Hi,Im new to schematics and i was wondering what ;VC and VB ,mean on the schematic drawings.
Title: Re: reading schematics,
Post by: selfdestroyer on August 09, 2016, 04:06:53 PM
This should clear it up
http://www.madbeanpedals.com/forum/index.php?topic=11229.0 (http://www.madbeanpedals.com/forum/index.php?topic=11229.0)

Cody
Title: Re: reading schematics,
Post by: daleykd on August 09, 2016, 04:07:26 PM
Simply put, they're voltage reference markers.

Sometimes, VA is used right after [Voltage In then diode or resistor].  Sometimes, VA is after a voltage divider.  Sometimes, it just means +5V after a voltage regulator.
Text only | Text with Images