I finished putting the Kraken envelope filter together and it passed sound when off but when turned on no sound is passing. I checked my switch and pots wiring and both are correct. I'm assuming it's to do with the ICs but I'm not sure what voltages I should be seeing.
Hello,
Start by checking out this thread: http://www.madbeanpedals.com/forum/index.php?topic=902.0
Post voltages and good quality photos of both sides of PCB.
Okay voltages are measured and something seems odd with IC1
IC1:CA3080 IC2:LM1458 Q1 Q2 Q3
1- 0 1-5.37 1-4.6 1-0.60 1-5.3
2-5.3 2-5.30 2-4.77 2-5.26 2-5.7
3-5.3 3-5.30 3-9.77 3 -5.27 3-9.77
4-0 4-0
5-0.60 5-5.3
6-4.42 6-4.3
7-9.77 7-5.3
8-0 8-9.77
(the soldering on the pots looks bad but the connection is being made)
photos of pcb
https://www.dropbox.com/s/7ut72iseyhg8ive/IMG_6893.JPG?dl=0
https://www.dropbox.com/s/snvjpi11zw0qebc/IMG_6892.JPG?dl=0