Couple of multis for Phil. First up is a Mid-Fi Demo Tape Fuzz clone and a Philosopher's Tone clone (TH Customs PCB) in a box.
(https://scontent-lhr3-1.xx.fbcdn.net/t31.0-8/15000615_993966774043376_2771935210639246576_o.jpg)
(https://scontent-lhr3-1.xx.fbcdn.net/t31.0-8/14976360_993966737376713_272866737731810977_o.jpg)
Next a Dipthonizer clone on bean's HoneyDripper 2015 board.
(https://scontent-lhr3-1.xx.fbcdn.net/t31.0-8/15000835_994065077366879_5936755577425008634_o.jpg)
(https://scontent-lhr3-1.xx.fbcdn.net/t31.0-8/14976325_994065084033545_2877672756970681402_o.jpg)
Perfect as always! Interesting power wiring on the HQ. Curious why you ran to the top of the main board from the daughter board. Is this a matter of already having the wires in place from rock before box?
I think when we probed it we found that the + pad on the bottom didn't go to the same place as the + pad on the top. I could be wrong there, but I had that in my head so I just wired it at the top.
the harlequin is crazy clean. freaky how you can only see 2 tiny wires.
Now thats some great artwork! You could eat off thoes internals.
Cody
That is some sexy insides and outsides. Well done as usual.
These internals are impossible, like you did some crazy physic voodoo to make them work, I'm convinced.
What awesome stuff! Great job!
yowza!