Built a Crazy Tubes Ziggy Overdrive from Perf and PCB Effects Layouts http://effectslayouts.blogspot.com/2016/05/crazy-tubes-ziggy-overdrive.html (http://effectslayouts.blogspot.com/2016/05/crazy-tubes-ziggy-overdrive.html)
If you haven't checked out the site you should totally do so, some great layouts on there and drill templates. Thank you for a great site.
I'm super impressed with this community, so many people willing to share knowledge and experience. Gotta throw a shout out to Madbean too for all the work he has done to educate and provide resources to people.
I etched the enclosure using some tips and tricks from this site, thanks to all those who posted all the great tips and special thanks to m-Kresol for saving my lungs and health by switching me over to ferric chloride for etching. I have found that you can get so much more control and quality out of the etches.
Alright enough of the love.
Had a little bit of trouble with the pcb only because there was a little bit of solder that overflowed to ground and it took me a while to figure that out. But... this pedal sounds great! The gain and tone controls are really usable and I can get some really cool sounds. And, you can totally dial in that Ziggy Stardust sound if you want to, which was the inspiration for the etch.
(http://i.imgur.com/OlzCBEO.jpg)
(http://i.imgur.com/J0RG1c1.jpg)
Nice work man! I've had a Ziggy board populated on my bench for like 3 months and I keep forgetting about it. Glad you dig it and thanks for your kind words about the site.
the etch turned out fantastic. Glad I could be of assisstance.
and yes, effectslayouts is a great site.