ok, so the LEDs on my madbean turn about keeps flashing on and off, when I touch pin three to take voltages they glow constantly as well all I have hooked up are the pots and the clipping switch. I also put resistor 8 on a switch so it goes between 470ohms and 1k8
my voltages from an 8.26 battery
1-4.3(sometimes it reads 1.45?)
2-3.81
3-3.69( they didn't glow this time?)
4-0
5-4.02
6-4.02
7-4.00
8-8.03
(http://i1305.photobucket.com/albums/s548/jessebelanger1988/IMG_0879_zpsh3vicuop.jpg)
(http://i1305.photobucket.com/albums/s548/jessebelanger1988/IMG_0882_zpsysxu0kld.jpg)
(http://i1305.photobucket.com/albums/s548/jessebelanger1988/IMG_0881_zps3rewj5f6.jpg)