Print Page - Sweet New Enclosures!!!

Title: Sweet New Enclosures!!!
Post by: Smeero on August 16, 2011, 03:20:59 PM

For those of you tired of the same old 125b 1590B 1590BB,etc. CHECK THESE HAMMONDS OUT! You can order all them from digikey!

1590TRPB
1590TRPBBK (black)
L W D
Trapezoid 4.41 x 2.42 (3.11 wider end) x 1.38
(http://www.hammondmfg.com/jpeg2/1590TRPB_AB.jpg)

1590TRPC
1590TRPCBK (black)
L W D
Trapezoid 3.74 x 4.79 (5.95 wider end) x 1.38
(http://www.hammondmfg.com/jpeg2/1590TRPC_AB.jpg)

1590STPC
1590STPCBK
L W D
Octagon 5.23 x 5.23 x 1.38
(http://www.hammondmfg.com/jpeg2/1590STPC_AB.jpg)

Title: Re: Sweet New Enclosures!!!
Post by: stecykmi on August 16, 2011, 04:17:14 PM

whoa. well that's weird.

Title: Re: Sweet New Enclosures!!!
Post by: Haberdasher on August 16, 2011, 04:19:13 PM

Well, those are pretty cool.

Title: Re: Sweet New Enclosures!!!
Post by: Smeero on August 16, 2011, 07:55:46 PM

Quote from: stecykmi on August 16, 2011, 04:17:14 PM
whoa. well that's weird.

What's so weird?

Gotta think Hammond might be aiming this at pedal builders. The little trapezoid seems like it would look real nice as a pedal. The horizontal trapezoid might be great for a two in one pedal, or an asymmetrical look if stood lengthwise. That octagon might make a cool fuzz face too :)

(http://www.hammondmfg.com/jpeg2/1590TRPB_Is.jpg)

(http://www.hammondmfg.com/jpeg2/1590TRPC_Is.jpg)

(http://www.hammondmfg.com/jpeg2/1590STPC_Is.jpg)

Title: Re: Sweet New Enclosures!!!
Post by: slimtriggers on August 16, 2011, 11:22:19 PM

Yeah, those are really cool! 8)

Title: Re: Sweet New Enclosures!!!
Post by: cjkbug on August 17, 2011, 12:04:31 AM

finally some new options!

Title: Re: Sweet New Enclosures!!!
Post by: gtr2 on August 17, 2011, 01:53:50 AM

I bet the black 1590TRPB looks like Dracula's coffin! :D

Title: Re: Sweet New Enclosures!!!
Post by: Smeero on August 17, 2011, 02:16:38 PM

Here's another new one called a Zwedge (not Hammond).

Looks very similar to the pedalenclosures.com Prism I

(http://i.ebayimg.com/t/Zwedge-DIY-Steel-60-s-design-Pedal-Enclosure-USA-Made-/00/$%28KGrHqQOKkQE2659bfUDBN6u+bTiPQ%7E%7E_3.JPG)

http://cgi.ebay.com/Zwedge-DIY-Steel-60-s-design-Pedal-Enclosure-USA-Made-/280690642058?pt=Guitar_Accessories&hash=item415a774c8a (http://cgi.ebay.com/Zwedge-DIY-Steel-60-s-design-Pedal-Enclosure-USA-Made-/280690642058?pt=Guitar_Accessories&hash=item415a774c8a)

Title: Re: Sweet New Enclosures!!!
Post by: raulduke on August 17, 2011, 05:38:12 PM

Cool enclosures mate.

Make a nice change from the standard stuff.

Will order some if CPC/Farnell start stocking them in the UK.

Title: Re: Sweet New Enclosures!!!
Post by: jtn191 on August 17, 2011, 07:40:52 PM

I like the look of that Zwedge more than the Prism I. But the YY ones are pretty slick

Title: Re: Sweet New Enclosures!!!
Post by: druz15 on August 17, 2011, 11:07:21 PM

that zwedge one looks cool, like the look of angled/elevated enclosures for fuzzes.

Tempted to do a fuzz face in one of those octagon ones, would be pretty sweet haha

madbeanpedals::forum

General => Open Discussion => Topic started by: Smeero on August 16, 2011, 03:20:59 PM