Text only | Text with Images

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: cpip on February 05, 2017, 07:48:49 PM

Title: Kingslayer: Can I use 430k instead of 422k resistor for R10?
Post by: cpip on February 05, 2017, 07:48:49 PM
Hello,

I'm working on the kingslayer right now (2nd build ever..!) and I don't have a 422k Resistor for R10, but I do have a 430k resistor. What will this effect? does it matter if i use the 430, instead?

http://www.madbeanpedals.com/projects/Kingslayer/Kingslayer_2015.pdf

thanks!
Title: Re: Kingslayer: Can I use 430k instead of 422k resistor for R10?
Post by: madbean on February 05, 2017, 08:29:47 PM
430k will be fine...should not be a noticeable difference.
Title: Re: Kingslayer: Can I use 430k instead of 422k resistor for R10?
Post by: cpip on February 05, 2017, 08:34:47 PM
Thanks!
Title: Re: Kingslayer: Can I use 430k instead of 422k resistor for R10?
Post by: somnif on February 05, 2017, 11:38:49 PM
If it really irks you, check your 430s with a dmm, likely a few of them will be in the ballpark of 422, especially if you're using carbon resistors.

(But it really doesn't matter much)
Text only | Text with Images