Hello,
A while ago I did a 1590A reverb for a friend. Well the crappy jacks I used failed and they needed to be replaced. So, I basically rebuilt this pedal. New Jacks, Enclosure, wiring, and Pot. It's a 1776 Rub-A-Dub reverb. Jon Patton (Midwayfair) did the PCB layout. Here are a couple pictures!
(https://3.bp.blogspot.com/-R_DVbjY3cFk/WKXIeMF5ZsI/AAAAAAAACQE/6b1Ryn-wUg8s702qNTCg9xfoqXDq_YKUgCLcB/s1600/Photo%2BFeb%2B16%252C%2B1%2B40%2B04%2BAM.jpg)
(https://2.bp.blogspot.com/-42cs062oSNc/WKXIeMgQppI/AAAAAAAACQA/SU94kdhCxroTDj3ZvCzSGCxPlKrdi96cQCLcB/s1600/Photo%2BFeb%2B16%252C%2B1%2B29%2B46%2BAM.jpg)
(https://1.bp.blogspot.com/--gfl4xXCRMo/WKXIdp6PYEI/AAAAAAAACP8/2KjW_yEWZm8yevTzEYs963aAAoApj9jPQCLcB/s1600/Photo%2BFeb%2B16%252C%2B8%2B27%2B34%2BAM.jpg)
Here is a side by side of the new enclosure (on the left) vs the old one (on the right).
(https://3.bp.blogspot.com/-6rmyaCDK4po/WKXKNOIeS7I/AAAAAAAACQQ/ZOEjOElPYR4K0VU4wHJ95-4uInCicd50wCLcB/s1600/Photo%2BFeb%2B16%252C%2B2%2B05%2B06%2BAM.jpg)
Hope you guys like it. Thanks.
-Mike-
Your etching certainly has become sharper :-)
Is that a diy knob ?
Quote from: drolo on February 16, 2017, 04:00:03 PM
Your etching certainly has become sharper :-)
Is that a diy knob ?
Nope I actually got it from okw enclosures. They are expensive, but really nice!
What PCB layout?! Just pretend its straight into the brick and baffle people ;D looks amazing, I can barely fit a jack and a pot into an A so I love build reports like this.
This post is triggering my PRSD (post 1590A reverb stress disorder).
Quote from: midwayfair on February 16, 2017, 04:16:19 PM
This post is triggering my PRSD (post 1590A reverb stress disorder).
lol Mine too. this was the 2nd enclosure i etched for this rehouse. The first i botched drilling.
Quote from: zombie_rock123 on February 16, 2017, 04:12:07 PM
What PCB layout?! Just pretend its straight into the brick and baffle people ;D looks amazing, I can barely fit a jack and a pot into an A so I love build reports like this.
And to make things worse I didn't use those jacks...i used the open frame nuetrik jacks...which are bigger.
See
(https://2.bp.blogspot.com/-sPRdwdW_PQc/WKXWS2MuW6I/AAAAAAAACQo/XrLnBJ-b_mU6L9Hsy3WJ0On2b9n8bEeagCLcB/s320/Photo%2BFeb%2B16%252C%2B11%2B39%2B02%2BAM.jpg)
(https://4.bp.blogspot.com/-ZK9eljcsF-0/WKXWS_zt1MI/AAAAAAAACQs/J6TNVF7CdWo5Wj-oB_Qd3DOmo8EVLuCjACLcB/s320/Photo%2BFeb%2B16%252C%2B11%2B39%2B16%2BAM.jpg)
I'll see if i can find the layout for it. and post it if that's cool with Jon.?
Quote from: flanagan0718 on February 16, 2017, 04:37:39 PM
Quote from: zombie_rock123 on February 16, 2017, 04:12:07 PM
What PCB layout?! Just pretend its straight into the brick and baffle people ;D looks amazing, I can barely fit a jack and a pot into an A so I love build reports like this.
And to make things worse I didn't use those jacks...i used the open frame nuetrik jacks...which are bigger.
I'll see if i can find the layout for it. and post it if that's cool with Jon.?
I think you might have posted it in the original build thread. Was that something lost in the crash?
Quote from: midwayfair on February 16, 2017, 04:43:23 PM
Quote from: flanagan0718 on February 16, 2017, 04:37:39 PM
Quote from: zombie_rock123 on February 16, 2017, 04:12:07 PM
What PCB layout?! Just pretend its straight into the brick and baffle people ;D looks amazing, I can barely fit a jack and a pot into an A so I love build reports like this.
And to make things worse I didn't use those jacks...i used the open frame nuetrik jacks...which are bigger.
I'll see if i can find the layout for it. and post it if that's cool with Jon.?
I think you might have posted it in the original build thread. Was that something lost in the crash?
that is a good possibility. I'll see if i can find it tho.
I found the files. I highly recommend doing the mods that Jon talks about in the doc. They make the build really shimmer. Here is a link to the folder.
https://www.dropbox.com/sh/u8v8ryynw4wrk3z/AABbwSvT0EOM5Tu9E4zkFq6la?dl=0 (https://www.dropbox.com/sh/u8v8ryynw4wrk3z/AABbwSvT0EOM5Tu9E4zkFq6la?dl=0)
Post 1590A Stress Disorder...can you get that just from looking or do you have to actually build one. I'm feeling a bit off after that build.
Cramming all that in a 1590A once: curious/devoted
Doing it twice: officially masochistic
(Should this ever apply)
Three times: "out"ing yourself as non-human
That really is insane!
Yep, insane and absolutely lovely! Love the look of it! Great great job!!
Thanks for all the kind words guys. I delivered it to my friend Darren yesterday. He's in love with it! Thanks again!
Sent from my iPhone using Tapatalk
Great job! It's crowded in there!