Just curious, where is everyone sourcing these? I got (5) from Amazon and my Kraken is not working using it. It could be something else, but I'm suspecting this chip. All I get is clicks that change with the various control and if I blast the volume on my amp I'm getting highly distorted, very quiet signal coming through.
https://www.amazon.com/pcs-CA3080-incl-8-pin-socket/dp/B01CM2TH7U/ref=sr_1_1?ie=UTF8&qid=1487543554&sr=8-1&keywords=ca3080
Please let me know if anyone has tried these and verified they are good. I've tried two with the same result (so it could be something else), but I plan to try a known "good" chip before going through too much trouble poking around on the board.
I've gotten some from polida on eBay that were good. Was a while ago but maybe these would work...
http://stores.ebay.com/POLIDA-ELECTRICAL-H-K-LIMITED/_i.html?_nkw=CA3080&submit=Search&_sid=1049472388
CA3080 are one of those parts that there are a lot of reports of bad/fake ones, and where I would think "If it's too cheap to be true, it probably is." Someone on diystompboxes recently reported a bad CA3080 from polida. I don't know if I'd trust any except smallbear or the big suppliers (if they have them).
I recently built a Kraken and used a daughterboard to adapt a LM13700. It works great. While a little inelegant, LM13700 are easy to find.
Agree with Red. If you can't get CA3080s from a reputable supplier like Smallbear, perfing a LM13700 daughterboard is a decent alternative.
It was a bad chip.
Found some metal can CA3080's on eBay for a nice price and popped one in there this weekend and it works now.
I just replaced CA3080 in my kraken. It was zapped. I replaced it with LM3080 and now it works like a charm.