Hey all
I've been listening to Kurt Vile a bit recently and loving his phaser sound. A quick Google shows he uses a Moog MF-103 Moogerfooger 12-Stage Phaser.
Just wondering if anyone is aware of any DIY 12 stage phasers that are availble? (I'm guessing there aren't).
Thanks in advance!
Dont know about 12 but this does 20 - https://www.thonk.co.uk/shop/randomsource-haible-tau-pipe-phaser-pcb/
I know Rick Holt made some kind of rubber band monster. Sonic Death Ray.
The NLC 329 Phaser/Flanger is 10 stages, I believe, based on the Aries 329 Phaser/Flanger.
It's a lot of very close together SMD work, however.
Me and Keefe are doing the A/DA Final Phase which is 8/10 stages depending on how you look at it, while I haven't ever tried a phaser over 6 stages i'm told by people like Mark Hammer that anything over 8 stages doesn't really change much when it comes to guitar and is more for synths.
is Mutron Bi phase do the job?..if you set it in series mode is it going to be a 12 stage phaser?
If you set it in series then yes, it's 12 stages.
You can set the second set of 6 stages to either the same LFO as the first set, a second LFO, or pedal control.
I've got a layout in the Eagle stage... can't really afford to get it fabbed right now, however. Are there any PCB versions of it out there?
Quote from: alanp on March 02, 2017, 05:16:44 AM
If you set it in series then yes, it's 12 stages.
You can set the second set of 6 stages to either the same LFO as the first set, a second LFO, or pedal control.
I've got a layout in the Eagle stage... can't really afford to get it fabbed right now, however. Are there any PCB versions of it out there?
Ooh nice. I'd be very interested in this! I hope you can get it off the ground.
Thanks everyone for the replies.