madbeanpedals::forum

Projects => Build Reports => Topic started by: mcasemo on July 29, 2017, 08:52:00 PM

Title: Dig Doug
Post by: mcasemo on July 29, 2017, 08:52:00 PM
Here is my completed dig dug 2, made for a friend who came across Brian's demo and really wanted one.  Searched for famous Doug's for a graphic, came up with Doug Henning.

After drilling, had no room vertically, the board is jammed up against the stompswitch, which is jammed up against the octagon.  Had some trouble with the step switch, think i got some drill shavings in it, it would only work on odd numbers, even would go full 8 steps.  Think i have it clean now.

Put the rez and filter pots on the bottom.  The trem side seems lower gain, i may add a resistor in line with the trim to bump it up a bit.

Love this thing, very fun.

Mark

(http://lh3.googleusercontent.com/PohkX9gb_kQpWfBpeuOvq-pTbl63VCZFzUOUyK86aYuBKr88tGhoWjlDlQcwjhgGV6L6UEEHn_KkWE23h0GsLsnzX3oXZWVL0t3oQg2ti_vAGmtfFgR1YhC0PXkx2d6Gpoo5mrq00Ny36VBr9sfQ4KX32fAoHCji-hdcqfpQ16LHix3lkz7PiPCgcAfW6Qa1XIr_MC1a5cI2k1Qn_QhdMVF-3nqlOWXYTxuozeCI37jVF1c3wxCzEf_zzbslF5IF-v_DlJ0Mx0gM1B_dqH7PgfTRx1Ss8dl6lQPG_tujejPWemSAn0dCSIZEP4zrWR0c6ZQG02eW2rVZr-uYPbHQ_neM7N-bXa66aej3A9kohdcRGFi4VVZzs6O9S5RsN6qgV9UJLLAnv5rOU--jXyI6gKmN706DgQpeoYtqPuh-UJVSn3uilTE2OQQjg_h_lc0wW8BglzqkFs9HVQkZCCWV_Q-gfIjEXnofwQwGV9F3pE25ljielaMOeLY53HghiB7-GXQTu-gVOZKKds6IMJKNbiFVVsxpOy8xYERAuGGWD0iIVL5y2kUS0QdYkEZbKK0udVcYxWme7sRWzWKf0zLWL7XI7Qx0HaXlCRDJntA6P1w6w2btYu8afOb-UQ=w1389-h926-no)

(http://lh3.googleusercontent.com/AuqW0A34swtc0uuHiQkf2oHYgtkGwY3GpDkPrPO-NdRQmfwZjP2nxSNdMbAq7JfsfBFJfq-7RWj2hOpirtH-Yfv-61t7ljnnP_UnK9DcdBjJ-xtdgK1aXCW_np8Xkl6y8S2WeMP6R6f2j7AT3KUJuZFDZ1REUBPNKDz9koUBVwEF-xV01bEhTZIHl5VFFR28fHxXC4xnsK7Po4qkkJl0nio4sP5o1tFrBlkyO0w4DYcEtJkY0mBfI1b_8mRceFGoygzWo-xludhg-oyTLri4cE8kMBHuPfVtcemrFu5sSw6P-m1WoG5S_WXcUqTmDFbv0b33fzxEs7M2pJufEvBYE5mJIUHH6lqwQFMVI3nNL5Z91XTw6rd32-rDxtngpxzYAxdHSRQtI0S6B0PK-iMIUrmC0XfBKSo8dOy4dPhVM8xGXk88FxKkW7QUaVUvUGY7WQ_g0JbEOqLbgMpKUsZrK6bDvbsntEJoVMyor0bkiiOolHtPRaGboOzQRfDtUyL_sEUD5MQAFqXf2va5CE80WSXSvfdHb9rYJm2yFw4riDIYOGiFBp3cxmMFAUubVhG-g4zZHTS9B_iVSoBXOBsUFv9GC0JU6uf2Sjad7UxwkgMpFoffdMgvul6EGw=w932-h926-no)
Title: Re: Dig Doug
Post by: Luke51411 on July 29, 2017, 09:27:57 PM
That looks great! I was expecting Nickelodeon's Doug.
Title: Re: Dig Doug
Post by: jimilee on July 29, 2017, 11:23:28 PM
Too awesome


Sent from my iPhone using Tapatalk
Title: Re: Dig Doug
Post by: matmosphere on July 29, 2017, 11:29:27 PM
HAHAHAHA, that looks pretty cool. Nice idea to put it in the octagon shaped enclosure. I'm surprised it fit.
Title: Re: Dig Doug
Post by: stringsthings on July 30, 2017, 10:45:36 AM
Nice.
Title: Re: Dig Doug
Post by: EBK on July 30, 2017, 11:51:36 AM
I would have gone with Doug McClure.
"You may remember me from such pedals as The Delay that Time Forgot."
Title: Re: Dig Doug
Post by: nzCdog on July 30, 2017, 10:06:00 PM
Haha nice build!  Cool graphic and enclosure shape, bet your friend will love it!  ;D