Print Page - Transistors for Mudbunny

Title: Transistors for Mudbunny
Post by: Guitar Master on September 03, 2011, 03:24:47 PM

On the BOD of the mudbunny it only lists one transistor, am I only supposed to put in one transistor? or are Q1-Q5 all supposed to be the same value as it says for Q1?

Thanks

Title: Re: Transistors for Mudbunny
Post by: cjkbug on September 03, 2011, 04:34:46 PM

they are all the same type (usually)

Title: Re: Transistors for Mudbunny
Post by: TheCobbenator on September 03, 2011, 04:35:13 PM

Yeah you need 4 of the same. I made this mistake when I built one for a friend and came up short. It was a derp moment

Title: Re: Transistors for Mudbunny
Post by: druz15 on September 03, 2011, 11:30:24 PM

I mixed and matched for mine had 3 reasonably high gain 2n5089s and one lower gain 2n5088 in the Q3 (or might have been Q4) position

Title: Re: Transistors for Mudbunny
Post by: Guitar Master on September 04, 2011, 02:59:49 AM

Okay. I did the same exact thing as you Cobbenator. I guess smallbear is going to get another order.

Title: Re: Transistors for Mudbunny
Post by: TheCobbenator on September 04, 2011, 05:57:42 PM

Yeah I ended up buying 6 on eBay bc it cane out cheaper with shipping. And faster. Good luck!

madbeanpedals::forum

Projects => General Questions => Topic started by: Guitar Master on September 03, 2011, 03:24:47 PM