Welp! I've been a bit inactive of late. (Baby's and sleep deprivation tend to do that) but finally.... FINALLY, got around to getting my mitts into this one. As always the madbean build doc was great and the calibrating tips were a huge help.
(https://uploads.tapatalk-cdn.com/20171111/c5c2db7ba0616dd0dc0f1529e92bff4c.jpg)
(https://uploads.tapatalk-cdn.com/20171111/2601f1d280dd083d52955afd6e46dddf.jpg)
Had a minor issue drilling the enclosure so I had to reroute the feedback trimmer. Apart from that it was a really smooth build
Keen to hear your thoughts.
Tommy
Sent from my iPhone using Tapatalk
although i hate Red and Black combination
i like your build, minus the white washer ;D
Nice! I ran into the exact same problem with my build. I was able to drill out the hole
a bit larger to move the 1/4" jack just enough.
If you ever get used to doing top-mounted jacks on 125Bs, it's easy to goof em when you do a 1590BB
Nice build and kudos to not fooling around with your return to building
Cheers guys.
Sent from my iPhone using Tapatalk