Text only | Text with Images

madbeanpedals::forum

General => Open Discussion => Topic started by: fritz on November 13, 2017, 09:24:08 PM

Title: road rage
Post by: fritz on November 13, 2017, 09:24:08 PM
road rage scematic shows c3 capacitor, furthermore documentation says in section 'How to use the Road Rage' (see also http://www.madbeanpedals.com/projects/RoadRage/docs/RoadRage_2015.pdf):

"I need ­9v output to power a fuzz circuit
Solder D1, D4, C1, C2, C6 and C7 to the PCB. Omit D2, D3, C4, C5, and REG1......."

what about c3?

thanks....
Title: Re: road rage
Post by: 287m on November 13, 2017, 10:24:06 PM
you mean -9v
omit C3
Title: Re: road rage
Post by: madbean on November 13, 2017, 10:37:09 PM
Yeah, omit it. It should have been on that list.
Title: Re: road rage
Post by: fritz on November 14, 2017, 01:27:55 PM
ok, I'll omit C3. and do I have to jumper the two C3 pads?


thanks in advance
Title: Re: road rage
Post by: madbean on November 14, 2017, 02:01:56 PM
Quote from: fritz on November 14, 2017, 01:27:55 PM
ok, I'll omit C3. and do I have to jumper the two C3 pads?


thanks in advance

Never jumper anything that says "omit". You gonna blow it all up!
Title: Re: road rage
Post by: fritz on November 14, 2017, 03:24:12 PM
ok, no jumper ::)

thanks for the quick reply&
Text only | Text with Images