Text only | Text with Images

madbeanpedals::forum

Projects => Build Reports => Topic started by: fair.child on December 29, 2017, 12:16:05 AM

Title: Another Afterlife Compressor!
Post by: fair.child on December 29, 2017, 12:16:05 AM
This is my 2nd Afterlife. One Afterlife has gone to my bandmate, so I decided to create another one for demo/testing it out an optical compressor. I thought it'd be a nice idea to keep it simple swirl with red and blue with red primer as the base coat. I did put the optical sensor underneath the board so I can get more spaces for closing it the 1590A lid. I added the Blu-Tac to keep the DC jack tight and secure.

Inside:
(http://preview.ibb.co/nBFNsG/IMG_4377.jpg)

Outside:
(http://preview.ibb.co/nN3Wmb/IMG_4378.jpg)

(http://preview.ibb.co/n4OLew/IMG_4380.jpg)

(http://preview.ibb.co/fA2Dzw/IMG_4381.jpg)
Title: Re: Another Afterlife Compressor!
Post by: jimilee on December 29, 2017, 12:23:57 AM
Genius move putting the vactrol underneath.
Title: Re: Another Afterlife Compressor!
Post by: fair.child on December 29, 2017, 01:55:00 AM
The previous build I did vactrol on the top. I gotta squeeze it in. This time I just decided to put it underneath for getting properly fit.
Title: Re: Another Afterlife Compressor!
Post by: blearyeyes on December 29, 2017, 07:08:04 AM
Love the 2 tone swirl.
Title: Re: Another Afterlife Compressor!
Post by: ciwi on December 07, 2018, 05:54:24 PM
What has happened to the Afterlife circuit? Do you have the one for your build still?
Text only | Text with Images