Text only | Text with Images

madbeanpedals::forum

Projects => General Questions => Topic started by: LaceSensor on January 13, 2018, 04:35:26 PM

Title: Project recommendations - Metal distortion with noise gate
Post by: LaceSensor on January 13, 2018, 04:35:26 PM
Hi

anyone got any suggestions for ready to build PCBs for something like a Rectifier (triple wreck?) with an integrated noise gate?

At a push I dont mind two PCBs but an all in one solution would be grand.

Recommend-me-do!

GO!
Title: Re: Project recommendations - Metal distortion with noise gate
Post by: Andlord on January 13, 2018, 04:44:45 PM
If you can find one you could try a Grind Custom Aeons, it is supposed to be a tightMetal clone with integrated Gate control. It was in stock when I looked at their page last time but as the page is now offline I'm not sure if there is a method to get in touch with them.
Title: Re: Project recommendations - Metal distortion with noise gate
Post by: Scruffie on January 13, 2018, 04:45:40 PM
Sounds like the Amp Tweaker - Tight Metal fits the bill, no idea how good the gate is but it has got a rudimentary one.

Beaten to it by seconds!
Title: Re: Project recommendations - Metal distortion with noise gate
Post by: 287m on January 13, 2018, 04:46:43 PM
maybe G2D Morpheus and Tight Metal?
Title: Re: Project recommendations - Metal distortion with noise gate
Post by: LaceSensor on January 13, 2018, 04:49:06 PM
ready to build PCBs fellas :)

but thanks
I dont really want to start digging in classifieds for out-of-print stuff.

anything immediate I can just buy and build easily ?
Title: Re: Project recommendations - Metal distortion with noise gate
Post by: alanp on January 13, 2018, 04:59:50 PM
Keefe can do the etched version, if you don't mind wires. The gate on the Tight Metal (Dragon Armour, for the etched) works quite well.
Title: Re: Project recommendations - Metal distortion with noise gate
Post by: Andlord on January 13, 2018, 05:00:51 PM
If SMD is not a dealbreaker for you, you can try try this one:
https://oshpark.com/shared_projects/rig8L8Kd

again it is a tight metal clone, it is from the same guy (may he RIP) who made the GC Aeons.
Text only | Text with Images