Looking at making a circuit with a wah inductor fit in a 1590A enclosure. I'm thinking that a typical wah inductor will not allow the lid to close due to height.
So my question is, what is the difference between a 500uH wah inductor and one of these (besides mojo, of course)?
https://www.mouser.com/ProductDetail/JW-Miller/9220-14-RC?qs=sGAEpiMZZMsg%252by3WlYCkU7PcQeYe9buex3Bmwag%2fB%252b0%3d (https://www.mouser.com/ProductDetail/JW-Miller/9220-14-RC?qs=sGAEpiMZZMsg%252by3WlYCkU7PcQeYe9buex3Bmwag%2fB%252b0%3d)
The typical wah inductor is 500mH (that is MILI-henries). Far more than 500uH (MICRO-henries)
So missed it by thaaaat much ;)
I'm wondering if I could take a few, wire them in series to get the correct inductance....
Quote from: dan.schumaker on January 22, 2018, 02:38:23 PM
I'm wondering if I could take a few, wire them in series to get the correct inductance....
I thought you were trying to get this into a 1590A. Won't that kind of defeat the purpose?
Quote from: dan.schumaker on January 22, 2018, 02:38:23 PM
I'm wondering if I could take a few, wire them in series to get the correct inductance....
Yes, but you'd need 1000 of them!
Yeah, I might not be able to fit 1000 of them on there. I definitely have room for 5 of these:
https://www.mouser.com/ProductDetail/JW-Miller/8250-104K-RC?qs=%2fha2pyFadujyNy41Dq%252b%2fYsbE2n7x2b%2faXcO5g8NZqSs%3d (https://www.mouser.com/ProductDetail/JW-Miller/8250-104K-RC?qs=%2fha2pyFadujyNy41Dq%252b%2fYsbE2n7x2b%2faXcO5g8NZqSs%3d)