Print Page - MINI ANGLED WRENCHS?

Title: MINI ANGLED WRENCHS?
Post by: trailer on March 14, 2018, 03:42:55 PM

Hi all,

Sorry if this has been asked and answered before. I was wondering if you all have a suggestion for mini wrench set, preferably angled, to reach those hard to reach spots when fine tuning pedals. For example, LED bezel nut that has loosened? Trying to avoid pulling the whole pedal apart and these would be immensely helpful in the future.

Thanks!

Title: Re: MINI ANGLED WRENCHS?
Post by: culturejam on March 14, 2018, 04:00:23 PM

I have one for tightening guitar nuts (under knobs, etc): http://amzn.to/2FSu4dS

But that's a great idea. Maybe I can model something and 3D print an angled wrench that is sized for pedals. Gotta get my printer back online...the heater cartridge in the hot end just died. :/

Title: Re: MINI ANGLED WRENCHS?
Post by: davent on March 14, 2018, 06:52:25 PM

I've one of those ESP guitar wrenches well, super handy, but my goto for inside and out of the enclosure are nut drivers which are screwdriver handles with sockets as the working element. You can buy individually or as sets, lots of options.

dave

Title: Re: MINI ANGLED WRENCHS?
Post by: thesmokingman on March 15, 2018, 03:59:12 AM

there are 1/4" drive crowfoot wrenches out there ...

Title: Re: MINI ANGLED WRENCHS?
Post by: juansolo on March 15, 2018, 08:15:31 AM

Did someone say wenches...?

:)

Title: Re: MINI ANGLED WRENCHS?
Post by: trailer on March 15, 2018, 12:37:01 PM

Quote from: thesmokingman on March 15, 2018, 03:59:12 AM
there are 1/4" drive crowfoot wrenches out there ...

My dude FTW!

Title: Re: MINI ANGLED WRENCHS?
Post by: blearyeyes on March 17, 2018, 08:11:32 PM

Quote from: juansolo on March 15, 2018, 08:15:31 AM
Did someone say wenches...?

:)

So where are these 10mm wenches I keep hearing about?

madbeanpedals::forum

General => Open Discussion => Topic started by: trailer on March 14, 2018, 03:42:55 PM